This is the final stage of the registration process where the Solar Monitoring hardware can be attached to the site registered.
PRO-TIP: This step should only be started once the device has been installed and is communicating with Solar Analytics.
Device Serial Number
Once hardware type is selected, type in the serial number for the Solar Analytics device. All serial numbers are 14 digits long and start with D7042 XXXX XXXX. Examples below:
Once the serial number is keyed in correctly, press connect. If the device is online, the portal will automatically detect if it as 3CT or 6CT monitoring device. When the device is successfully detected by the portal, a prompt like this should appear.
Assigning Circuits to Current Transformers
From here, the user will be presented with options to select and assigning monitoring circuits to each channel.
- PRO-TIP: This is where the information captured in “Connecting the CTs to the KR-63” is particularly important.
These are the types of inputs the available from a drop down menu:
- Not monitoring (Default)
- PV Site
- PV Site Net
- AC Load
- AC Load Net
- Other Subcircuit
If Other Subcircuit is selected, the user should be prompted to select the type of subcircuit from the following options:
- Battery Storage
- Electric Hot Water
- Solar Hot Water
- Air Conditioner
Once all circuits are appropriately assigned, click “Save Device Settings”.
If there are multiple devices installed at site, there is an option to “Add New Device”.
Once all the devices have been added, the site registration is complete. Click the “Finish” button to commission the site.
This step will trigger a welcome email to be sent to the customer email input in 7.1.1 Customers Details. This email will prompt the user to access the Solar Analytics Dashboard to set up their account.