General Safety Information

Recommended and Intended Use

The Solar Analytics Smart Monitor is 3G smart monitoring device that measures the solar production and whole-site consumption of any system. The Solar Analytics Smart Monitor is a revenue grade energy monitor that is compatible with all solar PV systems and inverters.

The SC-23 is the 3-current transformer (CT) variant of the Solar Analytics Smart Monitor. With these 3 CTs available to measure loads, the SC-23 is typically used for single phase systems.

The KR-63 is the 6-current transformer (CT) variant of the Solar Analytics Smart Monitor. With these 6 CTs available to measure loads, the KR-63 is typically used for three phase systems.

Both the SC-23 and KR-63 have the exact same form factor and footprint. They are designed to be installed inside a DIN enclosure in proximity to the point of common connection of a home or business. This is typically the main distribution board where both the Main Supply Switch and Solar Main Supply Switch is located.

Additional information and specifications of the Solar Analytics Smart Monitors can be found in on the support page. 

Safety Information

All electrical installations must adhere to all local requirements and standards. The following are some standards that must be conformed to when installing the Solar Analytics Smart Monitor (not limited to):

• AS/NZS5033:2014
• AS/NZS4777
• AS/NZS3000

To prevent personal injury or property damage and to ensure the long-term operation of the product, please exercise all safety precautions and measures.

Support and Contact Information

All contents of this document are made available online at

https://www.solaranalytics.com/au/support/installation-guides

If you have any technical questions or feedback regarding this or anything related to Solar Analytics, please get in touch.

Our support phone line is open from Monday to Friday, 9:00AM to 5:00PM AEST (excluding public holidays)

To help with the support request, the following information is necessary to provide you with the necessary assistance:

• Smart Monitor Serial Number e.g. D7042 0600 1234
• Product Type e.g. 3CT or 6CT
• Installation Address (if available)

Solar Analytics Support

1300 651 137

[e-mail]