The Solar Smart Monitor Modbus MB-63 & CET Meter is a package offer that has been designed specifically for applications where pattern approved billing data is required such as Power Purchase Agreements (PPAs), EV charger disaggregation, embedded networks and microgrids.
There are three hardware bundles offered as part of the Solar Analytics billing solution listed below.
- Single Phase Pass Through Bundle (i.e suitable for up to 60A single phase applications)
- Three Phase Pass Through Bundle (i.e suitable for up to 100A three phase applications)
- Three Phase CT Bundle (i.e suitable for up to 600 A three phase applications)
Before installation, we highly recommend to keep this two warnings in mind to prevent the device from getting broken:
- DO NOT power-up the Solar Analytics device before/simultaneously with the CET device. It has to be powered up after the CET meter.
- DO NOT use the 5A white CTs meant for CET meter onto the Modbus MB-63, this will break the Modbus MB-63
For more detail on the technical specifications, we would advise to refer to our Data Sheet attached below.